KTI Networks KSC-200 Installation Guide download pdf (Page 20)

-20-

2.6 Power Failure Relay Output

The device provides a relay output to report power failure event to a

remote alarm monitoring system. The replay output is provided with two

contacts labeled PF+ and PF- in the terminal block interface.

Use the provided 2P terminal plug for signal wiring and plug into the PF+/

- contacts. The function is designed as :

Power is normal PF+ contact is shorted with PF- contact.

Power failure PF+ contact is disconnected with PF- contact.

Note: Be sure the voltage applied on PF+/- contacts is within the

specification of 30VDC/1A max. or 120VAC/0.5A max.

2.7 Making Serial RS-232 Connection

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

No comments

KTI Networks KSC-200 Installation Guide Page 20